Ghostshield > Epoxy 325

Ghostshield- Nanotechnogy Driven Contrete Protection

Ghostshield Epoxy 325Epoxy 325 is a water-borne, two component epoxy designed to prime and coat concrete floors combining the highest quality of cyclo-aliphatic epoxy components.The Epoxy 325 provides incredible abrasion resistance and chemical resistance. Recommended for indoor areas with high risks of exposure to chemical spills, fuel, heavy equipment and extreme temperatures. As a water-based product, the Epoxy 325 is also much safer to apply than solvent-based products, having less hazardous fumes and similar risks. The Epoxy 325 is best used as a primer in conjunction with Urethane 645 as a top coat though it can also be used as a standalone product.

FORMULA: Industrial grade two component clear or colored water based epoxy primer and coating


  • Garage floor coatings
  • Primer or coating for an epoxy floor system
  • Garages and warehouses.
  • Industrial facilities
  • For interior use only

UNSURPASSED ADVANTAGES:prime and coat concrete floors

  • Water based epoxy formula
  • Formulated to protect and beautify concrete
  • Excellent substrate penetration
  • Stops dusting
  • No strong solvents
  • Excellent choice for garages, warehouses and industrial floors
  • Excellent hardness
  • Excellent abrasion resistance
  • Excellent chemical resistance
  • Excellent flexibility
  • Clear or colored
  • More durable, scratch and scruff resistant than other traditional epoxies
  • Easy to use and apply, labor-cost effective
  • Nontoxic, Low VOC’s and no harmful fumes.



Finish: Satin Gloss
Coverage: 200 sq.ft per gallon @ 5 mils
Shelf Life: 1 year
VOC’s: <120 g/L
Impact Resistance: 50 in/lb
Abrasion Resistance: 54 mg
Adhesion: 425 psi
Viscosity: 700 cps
Primer: None
Cure Schedule:
Pot life: 1 hour
Tack Free (dry to touch): 8 hours
Recoat/Topcoat: 10 hours
Light Foot Traffic: 24 hours
Fully Cure (heavy traffic): 7 days
Chemical Resistance Protection:
10% Sodium Hydroxide: Long Term Splash Spill|
10% Sulfuric: Short Term Splash Spill
10% Hydrochloric Acid: Short Term Splash Spill
20% Nitric Acid: Not recommended
50% Sodium Hydroxide: Short Term Splash Spill
Acetic Acid 5%: Short Term Splash Spill
Ethylene Glycol: Long Term Immersion|
Gasoline: Short Term Splash Spill
Mek: Not Recommeded
Xylene: Short Term Splash Spill


Get Started with Build a Wall


Modern Masonary Architectural LineLeedAutoclave AdvantageLandscape Design


Follow us on Facebook
  Follow us on YouTube   LinkedIn   Follow us on Twitter

© 2013 Day and Campbell                                  Webmaster